- 1 What is a cedar strip canoe worth?
- 2 How long does it take to build a cedar strip canoe?
- 3 How thick are cedar strips to build a canoe?
- 4 Is canoeing harder than kayaking?
- 5 How much is my canoe worth?
- 6 Are cedar strip canoes heavy?
- 7 How many cedar strips do I need for a canoe?
- 8 Is Cedar good for boat building?
- 9 Which is lighter aluminum or fiberglass canoe?
- 10 How difficult is it to build a canoe?
- 11 What is the best wood to make a canoe out of?
- 12 How much does a 12 foot fiberglass canoe weigh?
What is a cedar strip canoe worth?
On ebay you can find boats in the $1,500 to $2,500 range for a typical quality boat. Take a look at Woodsong Canoes for the ultra upper end.
How long does it take to build a cedar strip canoe?
There are a lot of wooden strips to put on, and there’s plenty of surface area to sand. You should count on it taking about 150-175 hours to finish the canoe.
How thick are cedar strips to build a canoe?
Standard strip thickness is 1/4 inch. Before committing to a light-weight build, builders may wish to read Bryan Hansel’s excellent article: Light But Strong – Building Cedar Strip Canoes for Wilderness Tripping.
Is canoeing harder than kayaking?
While a canoe is undoubtedly harder to capsize than a kayak — though they’re both pretty stable, honestly — a kayak has the advantage of being able to be righted in the event of a rollover. In general, canoes are wider and more stable than kayaks, but kayaks are faster and easier to maneuver.
How much is my canoe worth?
Any wooden or wood/canvas canoe in usable condition is worth $1000 – $1500. A canoe that is documentable will go on the high end, one that is particularly rare will bring more, up to $3000 for a wood canvas canoe, and as high as $5000 for an all-wood canoe.
Are cedar strip canoes heavy?
Cedar strip or canvas-covered wood frame canoes are still available, but are now usually custom-made (and priced accordingly). Wooden canoes tend to be quite heavy, and require regular maintenance to keep them looking and paddling beautifully over the years.
How many cedar strips do I need for a canoe?
A canoe that is 15 – 16 feet in length will require about 1024 lineal feet of strips that are roughly ¼ inch thick by ¾ inch high. Both of these dimensions can vary some amount.
Is Cedar good for boat building?
Cedar is a light dimensionally stable wood, with a very high strength-to-weight ratio. It doesn’t absorb water readily and is highly resistant to decay, so the common enemy of most other boat building timbers – rot – is not an issue. It really is an exceptional wood for boat building.
Which is lighter aluminum or fiberglass canoe?
Aluminum canoes are lighter than wood but heavier than fiberglass. The overall benefit of aluminum canoes is durability. They’re slow moving but tough and require very little maintenance.
How difficult is it to build a canoe?
Making a strip canoe isn ‘t particularly hard … you will need to have some woodworking skills or the patience to acquire them; a budget for reasonably good materials and tools; a place to build it; and some free time.
What is the best wood to make a canoe out of?
Northern white cedar is absolutely the best wood for canoe ribs and planking. Its light weight, strength, flexibility and rot resistance can not be matched by any other wood.
How much does a 12 foot fiberglass canoe weigh?
How much does a canoe weigh? A typical polyethylene (plastic) solo canoe weighs 50 pounds (23 kg). Fiberglass 2-person canoes weigh between 55 and 70 pounds.